- Dynamic fatigue testing machine
- Friction and wear testing machine
- Fastener special testing machine
- Static mechanical property testing machine
- In-situ tensile testing machine
- Non-standard customized large and small mechanical equipment
- Metallographic sample preparation and analysis equipment
- hardmeter
- Solution of overall design and planning of laboratory
Microcomputer controlled torsion testing machine
The microcomputer controlled torsion testing machine is mainly used for testing the torsional mechanical properties of materials and finished products at room temperature, and can also be used for testing the torsional damage of materials and finished products. The parts under test are installed between clamps with adjustable space, which can adapt to different tests of torsional mechanical properties of the parts under test.
Introducción
Product Introduction:
The metal torque tester is mainly used to test the torsional mechanical properties of materials and finished products at room temperature, and can also be used to test the torsional damage of materials and finished products. The parts under test are installed between clamps with adjustable space, which can adapt to different tests of torsional mechanical properties of the parts under test.
Parámetros
Technical parameters:
1. Test torque: 5000Nm
2, torque measurement range: 1%-100%FS
3. Torque resolution: 1/300000 of torque
4. Minimum reading value of torsion Angle: 0.01°
5, torsion Angle relative error: ≤±0.5% (forward and reverse two directions)
6, test speed: 0.05-720°/min(before yield should be 3°/min-30°/min; No more than 720°/min after yield) stepless speed regulation
7. Sample holding range: φ6-φ20mm (or customized according to demander's requirements)
8, sample clamping diameter: standard sample (round sample Φ10, standard distance 50mm,100mm)
9, Power supply: AC 220V± 10%, 50Hz
Sobre LiLing
Alcance del producto
Noticias
Contacto con LiLing
Dirección：山东省济南市市中区魏华西路6号院内2号厂房
Business consultation (WeChat)
