- Dynamic fatigue testing machine
- Friction and wear testing machine
- Fastener special testing machine
- Static mechanical property testing machine
- In-situ tensile testing machine
- Non-standard customized large and small mechanical equipment
- Metallographic sample preparation and analysis equipment
- hardmeter
- Solution of overall design and planning of laboratory
JBW-300B Impact testing machine controlled by microcomputer
There are many kinds of impact testing machine, microcomputer control impact testing machine is a high-end model of impact testing machine, the general sales are and impact testing machine supporting equipment a piece of sales and use, there are low temperature tank, broaching machine, projector.
Introducción
Product Introduction:
JBW-300B microcomputer controlled impact testing machine is used to measure the impact resistance of metal materials under dynamic load in order to judge the properties of materials under dynamic load. The absorption work of the sample is obtained by using the difference between the potential energy before and the remaining potential energy after the impact of the pendulum displayed on the dial. The maximum impact energy is 300J, and a 150J pendulum is attached, and the specimen section is (10×10) mm. This machine has a large impact energy, suitable for impact toughness of large ferrous metals, such as steel and its alloys.
Parámetros
Technical parameters:
1. Impact energy: 300J 150J
2. Dial range and index value:
Energy range: 0-300J 0-150J
Dividing value of each small cell: 2J 1J
3. Pendulum torque: 0-300J M=160.7695N.m
0-150J M=80.3848N.m
4. Pendulum prelift Angle: 150°
5. The distance from the center of rotation of the pendulum shaft to the impact point (sample center) : 750mm
6. Impact speed: 5.2m/s
7. Span of sample support: 40mm
8. Support pliers rounded Angle: R (1.0 ~ 1.5) mm
(1mm for special order)
9. Blade curvature radius: R (2.0 ~ 2.5) mm
(8mm for special order)
10. Sample support surface inclination: 11°
11. Impact blade Angle: 30°
12. Impact blade thickness: 16mm
13. Angle measurement range: 0-360°
14. Angular resolution: ≤0.06°
15. Sample size: 10×10 (7.5 or 5) ×55 mm
16. The overall dimensions of the host (length × width × height) : (2150×640×1400) mm
17. Host weight: 420Kg
18. Power supply: three-phase four-wire system 380V 50Hz 400W
Main motor 250W
Sobre LiLing
Alcance del producto
Noticias
Contacto con LiLing
Dirección：山东省济南市市中区魏华西路6号院内2号厂房
Business consultation (WeChat)
